Description
What is a High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices?
The High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices CTRF-ANTENNA-FPC-7027-6817-IPEX model is an embedded flexible PCB antenna with a 5/7dBi gain LTE Cat-M, LTE-NB, 2G 3G 4G GSM antenna manufactured by C&T RF Antennas Inc for wireless network applications.
The High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices comes with a 68x17mm FPCB-based antenna size, a 5/7dBi high-gain, 100mm cable extension length, an Ipex antenna with an adhesive-mount sticker antenna.
It is a high-performance built-in flexible PCB antenna with a broad frequency range for LTE CAT M1 and NB-IoT device applications.
The High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices are supplied by C&T RF Antennas Inc, the cellular IoT antennas 6G 5G 4G 3G 2G antennas manufacturer in China.
C&T RF Antennas Inc provides RF wireless antennas with PCB & Flex PCB & Omni antenna types, covering the below frequencies:
5G NR PCB Antennas, LTE PCB Antennas, GSM PCB Antennas, Wifi PCB Antennas, NB-IoT PCB Antennas, LoRa PCB Antennas, GPS PCB Antennas;
5G NR FPC Antennas, 4G FPC Antennas, 3G FPC Antennas, NB-IoT FPC Antennas, Wifi FPC Antennas, GPS FPC Antennas, LoRa FPC Antennas;
5G Omni Antennas, 4G Omni Antennas, Wifi Omni Antennas, LoRa Omni Antennas; etc.
Contact us for more information on the High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices such as 4G Cat-M1 and NB-IoT Flexible PCB Antenna datasheet, 4G Cat-M1 and NB-IoT Flexible PCB Antenna pricing, 4G Cat-M1 and NB-IoT Flexible PCB Antenna inventory.
Or other 4G Cat-M1 and NB-IoT antenna designs.
High-performance Flexible Antenna For 4G Cat-M1 and NB-IoT Devices Specifications
Flexible Antenna For 4G Cat-M1 and NB-IoT Devices Electrical Specifications |
|
| RF Antenna Type | Embedded FPC Antenna |
| Model | CTRF-ANTENNA-FPC-7027-6817-IPEX |
| Frequency | 700-960MHz, 1710-2700MHz |
| Gain | 5dBi/7dBi |
| VSWR | ≤2.0 |
| Impedance | 50 Ω |
| Polarization | Linear |
| Cable Type | RG1.13 |
| Connector | U.FL/IPEX |
| Cable Length | 100mm |
| Lightning Protection | DC-Ground |
Flexible Antenna For 4G Cat-M1 and NB-IoT Devices Mechanical Specifications |
|
| FPC Board Dimension | 68*17mm |
| Weight | Approx. 6g |
| Material | FPCB + RG Cable + U.FL connector |
| Operation Temperature | -40˚C ~ +85˚C |
| Storage Temperature | -40˚C ~ +80˚C |
| Color | Black |
| Antenna Design | Dipole Array |
| Mounting | Connector/Sticker |
| SafetyEmission and other | RoHS Compliant |
| Applications | ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, 2G/3G/4G/LTE/LTE-IoT/GSM/GPRS/UMTS, etc. |
What is Cat-M1?
In R12/R13, 3GPP optimized for IoT several times.
The first was the addition of a new terminal class Cat.0 in R12, which dropped support for MIMO (multiple antennas), simplified it to half-duplex, reduced the peak rate to 1Mbit/s, and reduced the terminal complexity to 40% of a normal LTE terminal. In this way, the initial cost requirements for IoT have been met.
However, although the channel bandwidth of Cat.0 terminals is reduced to 1.4MHz, the receive bandwidth of RF is still 20MHz (too large).
So, 3GPP added Cat.M1 grade terminals in R13, with both channel bandwidth and RF receiving bandwidth of 1.4MHz, further reducing terminal complexity.
Cat.M1, which is what we used to call eMTC (enhanced Machine-Type Communication).
M1, also known as eMTC (Enhanced Machine-Type Communication) In addition, 3GPP added a new Cat.NB-1 in R13, which has a receive bandwidth of only 180kHz.
This Cat.NB-1 is our NB-loT (Narrow Band Internet of Things).
High-performance Flexible PCB Antenna Features
Reviews
There are no reviews yet.