5 RFID Readers Problems and Troubleshoots

5 RFID Readers Problems and Troubleshoots - C&T RF Antennas Inc

Today, we talk about the five biggest RFID Readers problems and troubleshoots, then we know how to avoid them. We know that designing and using an RFID reader can also present significant challenges. Here are the most common pain points we have found in over 20 years of providing RFID design services and testing solutions […]

What is New 5G?

What is New 5G communication network diagram - C&T RF Antennas Inc

Before we talk about what is new 5G technology, let’s start with a basic electromagnetic wave principle, which is: speed of light = wavelength X frequency. When the speed of light is fixed at 300,000 kilometers per second, the longer the wavelength, the fewer vibrations per second. In other words, the wavelength and frequency of […]

What is 433MHz Frequency?

What is 433MHz Frequency 433MHz network group types - C&T RF Antennas Inc

In IoT applications, BLE frequency, 433MHz frequency, Wi-Fi frequency, 2.4GHz frequency, GPS frequency, GPRS frequency, LoRa frequency, NB-IoT frequency, etc. are often mentioned technologies. Among them, the 433MHz frequency has a wide range of applications but is not well known. In this article, we will start with a few basic knowledge points to introduce 433MHz […]

20 Golden PCB Design Rules

20 Golden PCB Design Rules - C&T RF Antennas Inc

This article introduces the 20 most effective PCB design rules in the use of design software for PCB layout design and commercial manufacturing that should be kept in mind and practiced. Currently, semiconductor integration is increasing, many applications have readily available system-on-a-chip and are powerful, but many applications using case electronics still require the use […]

What is LoRaNET?

What is LoRaNET data collection network - C&T RF Antennas Inc

LoRaNET protocol is a LoRa networking protocol, there are various LoRa protocols on the market now, LoRaWAN, CLAA, LinkWAN all have their own advantages. For LoRa applications, stability and reliability is the key, and this article will take you through the LoRaNET protocol in detail. What is the LoRaNET? LoRaNET is a LoRa networking protocol […]

What is Lora vs. Zigbee?

What is Lora vs. Zigbee - C&T RF Antennas Inc

After the analysis of LoRa vs. ZigBee technologies, you will learn about what is the difference between LoRa and ZigBee technology. In LoRa vs. ZigBee technology, LoRa is a variety of wireless technologies for IoT applications, which can form a local area network or a wide area network. In LoRa vs. ZigBee technology, ZigBee is […]

What is GSM meaning?

What is GSM meaning - C&T RF Antennas Inc

What is GSM? Global System for Mobile Communications, or GSM for short, is a digital mobile communications standard developed by the European Telecommunications Standards Organization ETSI. It uses time division multiple access technologies for its air interface. Since its commercial introduction in the mid-1990s, it has been adopted by more than 100 countries worldwide. GSM […]

5 IoT Wireless Technology Comparisons

5 IoT Wireless Technology Comparisons - C&T RF Antennas Inc

After the read, you will learn about the simple results of the wireless technology comparisons, the 5 comparisons of IoT networking technologies NB-IoT, LoRa, ZigBee, Wi-Fi, and Bluetooth. What is the Internet of Things (IoT)? The Internet of Things (IoT) is the Internet where everything is connected. There is another way to say it: the […]

Narrowband-IoT vs Lora

Narrowband-IoT vs Lora Technology - C&T RF Antennas Inc

What is the difference between narrowband-IoT vs Lora in LPWAN technology? The two Narrowband-IoT vs Lora technologies have different technical and commercial characteristics and therefore differ in terms of application scenarios. This article explains the differences between the Narrowband-IoT vs Lora two technologies and explains the application scenarios for which each is suitable. Here have […]

6 PCB Design Guidelines

6 PCB Design Guidelines - C&T RF Antennas Inc

Here are the PCB design guidelines, when starting a new design, most of the time is spent on PCB circuit design and component selection, the PCB layout routing stage is often not well thought out due to inexperience. Failure to provide sufficient time and effort for the PCB layout and routing phase of the design […]