High-performance 1575.42MHz PCB GPS Antenna

Description

What is High-performance 1575.42MHz PCB GPS Antenna?

The High-performance 1575.42MHz PCB GPS Antenna internal antenna CTRF-ANTENNA-PCB-1575-3608-IPEX is a passive GPS antenna 1575.42MHz PCB GPS Antenna manufactured by C&T RF Antennas Inc.

The High-performance 1575.42MHz PCB GPS Antenna comes with a 2dBi gain, 100mm RG cable, and Ipex/u.FL connector, adhesive mount, and easy installation are good choices for internal tracking devices.

Which antenna is used in GPS?

Most of the receiver manufacturers use a microstrip antenna(PCB board antenna). These are also known as patch antennas. The microstrip may have a patch for each frequency so it can receive one or all of the GPS carriers.

What is the principle of real-time differential dynamic GPS positioning?

Real-time differential dynamic positioning is to place a GPS user receiver on a moving carrier and another GPS receiver between a reference station so that the real-time position of the moving carrier is measured collaboratively.

The data obtained from these real-time positions are then processed to obtain the specific trajectory of the moving carrier, so the principle of differential dynamic positioning is also called “relative dynamic positioning”.

Real-time differential dynamic positioning (DGPS) is to use two receivers to simultaneously measure the navigation and positioning signals from the same GPS satellite at two stations to jointly measure the precise position of the dynamic user.

The coordinate information of one of the detection stations is known, and the reference receiver is the GPS signal receiver located at that reference point.

The dynamic receiver, i.e., the GPS signal receiver, is installed on the motion carrier, and the reference receiver and the dynamic receiver simultaneously measure the positioning signals from the same GPS satellites.

Using the 3D position information measured by the reference receiver and comparing it with the known 3D position information of the point, the corrected value of the 3D coordinate information of the GPS position can be obtained.

The corrected value of the GPS 3D coordinate information is sent to the dynamic receiver group of other customers in time to correct the real-time coordinate position information detected later, which is called real-time differential dynamic positioning.

The PCB GPS Antennas are manufactured by C&T RF Antennas Inc, the embedded antennas active GPS antenna supplier and passive GPS antenna manufacturer in China.

The High-performance 1575.42MHz PCB GPS Antennas are manufactured by C&T RF Antennas Inc, the active GPS antenna supplier, and passive GPS antenna manufacturer in China.

C&T RF Antennas Inc provides RF antennas with PCB & Flex PCB & Omni antenna types, covering the below frequencies:

5G NR PCB Antennas, LTE PCB Antennas, GSM PCB Antennas, Wifi PCB Antennas, NB-IoT PCB Antennas, LoRa PCB Antennas, GPS PCB Antennas;

5G NR FPC Antennas, 4G FPC Antennas, 3G FPC Antennas, NB-IoT FPC Antennas, Wifi FPC Antennas, GPS FPC Antennas, LoRa FPC Antennas;

5G Omni Antennas, 4G Omni Antennas, Wifi Omni Antennas, LoRa Omni Antennas; etc.

Contact us for more information on the High-performance 1575.42MHz PCB GPS Antenna such as the High-performance 1575.42MHz PCB GPS Antenna datasheet, High-performance 1575.42MHz PCB GPS Antenna pricing, and High-performance 1575.42MHz PCB GPS Antenna inventory.

High-performance 1575.42MHz PCB GPS Antenna Specifications

Embedded High-performance 1575.42MHz PCB GPS Antenna Features